Bar Table Ice Maker Snowflake Ice Maker Ice Maker Integrated Ice Maker

Product features: 

1. The frozen water of the storage tank needs the water pump to circulate through the evaporator of the plate type or seperated;

After the compressor operates, it is vaporized by suction-compression-exhaust-condensing (liquefaction)-throttling-in the evaporator at a low temperature evaporation heat-absorbing of-10 to-18 degrees. Frozen water in the water temperature of 0 degrees continues to condense into ice on the surface of the evaporator at a lower temperature. When the ice condenses to a certain thickness, the cryogen the evaporation temperature after reaching the set temperature of temperature control, the defrost solenoid valve is connected, and the heat pump is often used for deicing, and then the next cycle is realized.

      Yiwu Junda Refrigeration Equipment Co., Ltd. is a professional manufacturer of fresh workbench. It is a well-known enterprise in the refrigeration industry and a supplier of high-quality refrigeration equipment. Door freezer, six-door freezer, fresh workbench, preservation cabinet and other refrigeration products. Welcome new and old customers to call the free consultation hotline to inquire.

  Better quality and better service, please consult +86 13957937914+86 579 98355500 for details 

Hotels, hotels, canteens, supermarkets, convenience stores, fresh food, fruits, milk

 1. Take off the outer packing, and take off the attached file holder, inlet tube, drain pipe, ice spoon, gasket and other accessories from the ice box.
2. Place the ice maker in a ventilated place, maintain a space of not less than 150mm with the wall, away from the heat source, and ensure the smooth placement of the machine.
3. Connect a 12-piece soft plastic drain pipe ripple attached at random with the discharging tube 7 on the back of the machine, and place the other port in the water box (self-supplied) or sewer.
4. Connect one end of the attached inlet tube to the faucet with 3/4 "screw joint of the drinkable tap water supply pipe, and the water pressure of the water supply pipe is 1.5-3kg/cm2, the other end is connected to the water valve screw joint 6 on the back of the ice machine. Note that when connecting, sealing pads (randomly matched) should be placed on both ends of the inlet tube.
5. Unscrew the tap water faucet to ensure smooth flow of inlet tube water.
6. Plug the power plug, press the rocker switch on the operation panel, and then the ice machine starts to work. The Ice Machine makes continuous automatic ice making from water inlet to ice making, deicing and ice storage, if the ice quantity in the ice box reaches a certain degree, the ice-filled light on the operation Panel 2 will turn on, and the ice machine will shut down automatically; When the external water supply pipe (or pure water supply system) breaks off water or fails to supply water, the water shortage light on the operation panel of the ice machine will be on, and the ice machine will automatically stop.